- Erledigt (Lösung)
- troffeo
- 27. November 2023
1. offizieller Beitrag
- 27. November 2023
Hi all,
I install the omninavigation via Steam.
Also i activate the lisance here.
But the navigation seems not work.
Starts with Omsi but works at the backround and i do not see anything.
I try to reinstall but the problem still remain.
I cant find anyware a manual how to, but i can't.
So i need help to work and to make playble.
Thanks in advance
[PeDePe] Community-Bot
Hat das Label In Bearbeitung hinzugefügt.
- 27. November 2023
Hi troffeo,
please try a test drive on Grundorf or Berlin-Spandau. One of the two maps supplied with OMSI.
- 28. November 2023
Hi @PeDePe,
Thanks for your reply.
I try both Grundorf, Berlin - Spandau and also Baumgarten maps as you suggest above.
The application load well with Omsi 2, but the screen of the navigator still freeze and no do anything.
I try to make a route but the screen of the navigator still freeze and don't have also the red line of the route neither my name.
The application didn't anything at all.minimapLog.txt
- 28. November 2023
Okay,
let us try something Else.
In the main directory of OmniNavigation there is a file with the name "startAdmin.bat". Please start this file once with administrator rights. OmniNavigation should now open as usual - a black console window should also appear, which should gradually fill with content. If the problem occurs again, please copy the contents of the black console window into your thread. Important: Please copy everything first and then close OmniNavigation (if you close OmniNavigation or kill it via the TaskManager, the black console window will also close).
- 28. November 2023
- 30. November 2023
Hi troffeo,
it looks like your network is not forwarding the requests to our server. Please check your local firewall and port permissions. You may need to refer to the manual of your security software.
- 30. November 2023
Zitat von [PeDePe] Daniel T.
Hi troffeo,
it looks like your network is not forwarding the requests to our server. Please check your local firewall and port permissions. You may need to refer to the manual of your security software.
Hi,
I cant understanding well your request.
First of all I have your BCS and work without and issue (when use the BCC I can see the omninavigation to works fine!) so I don't think the problem with the omninavigation isn't my network!
Also I don't have any security software, except the windows firewall. At the top, the folder of OMSI 2 installation in my pc (also is the same file folder who I have install the OmniNavigaton), has exception of the windows firewall.
Second is better to give me a product manual to see how it work your product, because here our process to solve my problem is very very slow...
I try to use the omninavigation from the Monday without any lucky...
FYI I have uninstall the omninavigation and if we cant find any solution to works Ill like to refund it.
Thanks
George
- 1. Dezember 2023
I have forwarded your request to the developers. Apart from the connection problem, no other cause is currently visible to me.
[PeDePe] Daniel T.
Hat das Label von In Bearbeitung auf 2nd Level geändert.
- 4. Dezember 2023
Zitat von [PeDePe] Daniel T.
I have forwarded your request to the developers. Apart from the connection problem, no other cause is currently visible to me.
Hi again,
Did have any news about my problem?
How long time needs for the process?
Thanks
[PeDePe] Daniel T.
Hat das Label von 2nd Level auf In Bearbeitung geändert.
- 5. Dezember 2023
I have the answer from the developers:
According to the log file, the connection to the omniNavigation interface cannot be established. This may be due to the following reasons:
Firewall or security settings: The user's firewall or other security settings could be blocking access to port 5059. This is particularly relevant if the application works on other computers but not for this particular user.
Network problems: There could be a problem with the user's network configuration that is preventing access to the local host (127.0.0.1). The use of a VPN could possibly be a cause of this.
- 5. Dezember 2023
I see the possible reasons causing the problem but I can't see the solutions to fix the problem.
So what you suggest to fix it?
Again I want to say that:
1. I dont use any 3rd part of security or firewall except the windows firewall, plus also I have done exception the installation folder from windows firewall and windows security scan.
2. My network has pure factory settings since 10 years, plus also with the same network I can access to BCS (Bus Company Simulator) and I
can use the inside OmniNavication without any issue.
I'm still to wait a solution, if you can provide it.
Thanks in Advance
George
- 6. Dezember 2023
Perhaps port 5059 is being used by another application on the system and is therefore blocked. This port is only used by ON, not by BBS, which might explain why there are no problems with the BBS. Unfortunately, we don't have any other solution.
- 6. Dezember 2023
How can find and fix that 5059 port?
- 6. Dezember 2023
You will receive this information from the manufacturer of your software. In your case Microsoft.
It is often sufficient to fill a search engine of your choice with the question. We only offer support for our software.
- 6. Dezember 2023
I open the 5059 port (both TPC and UDP) plus setup both ports to allow edge traversal.
Now I can see the map of the Omninavigation to work (I can see online other drivers), but I can't see myself and the red line of my selected route.
So now what is the problem????????
PS attached the log file and the Omninavigation start-Admin.bat file.
log.txtOmniNavigation_start-Admin.bat.txt
I'm still waiting for a solution
[PeDePe] Daniel T.
Hat das Label von In Bearbeitung auf 2nd Level geändert.
- 9. Dezember 2023
Is the timetable set correctly in OMSI? Can you please try it out on a simple map like Grundorf?
Otherwise there still seems to be a problem with the communication to the OMSI interface.
- 10. Dezember 2023
Hi Daniel,
I try with Grundorf but the problem still the same.
Also from yesterday the BBS start to have problem too.
Still at loading with no process, as say without to communicate and load the omsi.exe
I noticed that popup (you can see at the attachment's photo's) who ask me about how I want the program to open.
I think don't' have that before.
It's normal?
Finally how can make your programs to communicate with the Omsi?
What you suggest to I do about it?
- 10. Dezember 2023
Okay, this is a really unusual problem and we have had it before with OMSI. It seems that some entries in the Windows registry are no longer correct. Unfortunately, the only tip I can give is to completely uninstall OMSI and BBS, delete the remnants from the hard disk and reinstall.
[PeDePe] Daniel T.
Hat das Label von 2nd Level auf In Bearbeitung geändert.
- 10. Dezember 2023
I try make start the BBS "manually"
And works!
I'm pretty sure that is a conflict maybe:
A. Java
B. Some strange thing caused when install the Omninavigation!!!
Because NEVER had issues with BBS before...
How you explain that the BBS works OK when start manually?
Because at my point (I'm not pro even med but ok) that problem isn't that to must have uninstall 200gb and all my Omsi installation for no reason...
I believe the uninstallation, the format etc. is the easy way to avoid all my complains.
BUT I'm strongly sure that after the fresh install, the problem's still remains...
So I don't like to uninstall at the moment, nothing except the bad programs may i say like Omninavigation....
Please look my pictures below
Also I want to ask the Java requirements to works the BBS, in case missing something
- 11. Dezember 2023
Hi, a new installation still makes sense. There conflicts with registry and OMSI related Plugins.
Java is embedded and did not use any external Java InstallationThe approximately 200GB of data is mainly located in the folders:
- Vehicles
- Sceneryobjects
- maps
- splines
- Ticketpacks
- Addons
You are welcome to save these folders beforehand and restore them in the new installation.
- 12. Dezember 2023
Hi Daniel,
I have to admit I was wrong!!!
I followed your advice, plus bought a new SSD disk and proceeded with a Omsi fresh install with it.
Starting with the basics, only the Omsi core game plus BBS-ON, AUXI tools and Enhanced Environment Pack, BOTH work without any issues.
So I apologize for inconveniencing you and wasting your time in order to resolve an issue that was clearly my responsibility!
I think I should close the issue as a resolution of my own fault.
I hope my "good luck" continues tomorrow when I install and everything else.
Thanks and sorry again!
- 12. Dezember 2023
Hey, I'm glad to read that the error no longer seems to exist. You don't need to apologize. Everything is fine. If errors occur again, please contact us again.
[PeDePe] Daniel T.
Hat das Label von In Bearbeitung auf Erledigt (Lösung) geändert.
Teilen
Benutzer online
- 2 Mitglieder und 21 Besucher
- Rekord: 99 Benutzer ()
- [PeDePe] Stefan
- uli_DK
- Legende
- Administratoren/2nd-Level Support
- Support-Leitung
- Supporter
- Trip-Team Leitung
- Trip-Team
- Tester
- Fachmann
- Community-Sprecher